Alabama Science P.6

ScienceGrades 9–12Scale, Proportion, and Quantity

Standard Cluster

Obtain, evaluate, and communicate information concerning static and current electricity. a. Develop and use a model to describe the mathematical relationship among charge, distance, and force as expressed by Coulomb’s law. b. Obtain, evaluate, and communicate information regarding the relationship among voltage, current, and power for direct current circuits. c. Create models of series, parallel, and mixed direct current circuits. d. Use mathematics and computational thinking to determine the voltage, current, and resistance for an entire circuit and at each resistor or load.

2023 Alabama Course of Study: Science · Energy

Cluster contents

Standards in This Cluster

P.6 is a cluster heading. These are the individual standards under it.

Teacher's field guide

What This Cluster Means

What Students Need to Do

Students use a model to show how charge and distance affect electric force. They check claims about static charge and direct current against diagrams, measurements, and sources. They draw series, parallel, and mixed circuits, then calculate resistance, voltage, current, and power for the circuit and each load.

What Mastery Looks Like

They predict that doubling the distance between charges cuts the force to one-fourth, while doubling one charge doubles it. For a 12 V source with a 2 Ω resistor in series with 3 Ω and 6 Ω parallel resistors, they find 4 Ω total resistance and 3 A total current. They label 6 V across each parallel resistor and calculate its current and power.

Common Misconceptions

Students may think doubling the distance between charges only halves the force. They may think current gets used up as it passes through a resistor, or that parallel branches always carry the same current. They may add parallel resistances as though the resistors were in series.

How to Assess It

Use a two-part exit slip: “If two charges move twice as far apart, what happens to the force?” Then show a 12 V source with a 2 Ω resistor in series with 3 Ω and 6 Ω parallel resistors, and ask for total resistance, total current, and voltage across each resistor.

Lesson moves

Ways to Teach It

  1. Build series, parallel, and mixed circuits with a 9 V battery and three 1 kΩ resistors; measure voltage and current with a multimeter.

  2. Ask: “If two charged spheres move twice as far apart, how does the force change?” Have students defend their answers with a sketch.

  3. Give pairs circuit cards with a 12 V source and labeled resistors; race to find total resistance, branch current, and each resistor’s power.

  4. Use a phone charger’s output voltage and current ratings to calculate its maximum rated power, then compare it with another charger’s label.

Free download

Printable P.6 Worksheet

Preview of the P.6 printable worksheet

A ready-to-print activity worksheet aligned to P.6, with an answer key for the teacher on its own page. No account needed.

PDF, US Letter, prints cleanly in black and white.

Download the worksheet

Keep exploring

Related Standards

Turn this cluster into a lesson

Grade, subject, topic, and the complete cluster are prefilled. Create one free, no account needed.

Also for this cluster:Make a WorksheetMake a QuizMake a Sub Lesson